|
|
 |
 |
|
|
|
|
| Model：EP-714 |
| Name：Epoxy Resin for Infection and Crack Reinforcement |
| Injection and reinforcement used only: cracks injection, caulking, reinforcing and repairing |
|
|
| Description |
YU TAI Epoxy Resin for Injection and Crack Reinforement is a transparent, two component, low vixcosity and light yellow injecton repairing material. It is applied by high and low pressure injecting to cacks of structure to renew the building. |
| Advantage |
1. Low viscosity and it can permeate structure to keep original structure.
2. Avoid being cracking and corrosive of reinforced concrete.
3. Superior adhesive and durability.
4. Excellent compressive strength, flexural strength and tensile strength. |
| Instruction for use |
1. Observe cracking stitution first.
2. Determinate the injection position.
3. Preparation before construction.
4. Install the syringe needles on the port and sealing it by Epoxy sealant joint.
5. Caulking Epoxy putty into cracks, and inject Epoxy resin after it is fully curing.
6. After injection material is fully curing, remove syringe needle and modify surface. |
| Service time |
100g/25C/120min |
| Mixing Ratio |
Main: Hardener=2:1(wt/wt%). |
| Packing |
30kg/set |
|
| |
 |
|
|
|
