EPOXY RESIN MATERIAL
 
PU
 
ASPHALT COATING
 
Water-based Compound Waterproofing Material
 
Acrylic Type Paint
 
Efflorescence Prevent
 
Cement Moart Flooring Material
 
Injection and Crack Reinforcement Material
 
Silicone
 
Silicic Acid
 
 
 
 
Model:UT-200
Name:CHI BI TOU Anti-effloresced Material
Anti-efflorsced used only: Simple to use, Economical, Rapid construction
Description YU TAI CHI BI TOU Anti-effloresced Matferial is a water-based concrete crystallized permeate agent, which is a specifical designed actively Silicon organic compound by medium water react with CaOH inner of concrete stucture to CaSiO3 to seal capillarity, then coating a layer of special sealing agent to prevent permeating the moistue in air and stop producting Carbonate crystallizine and prevent effioresced wall occur again.
Advantage 1. Water based and without special odor like solvent.
2. Easy, simple and rapid to construct.
3. Economical.
4. Easy to renew to its original appearance.
Instruction for use 1. The wall surface, which need to treatment should be cleaned and dried first, and restrict to dry by fire or heat resource.
2. Wall cleaned by steel brush to remove the crystal stain materials(effloresced wall) of the wall.
3. CHI BI TOU construction: At first coating, diluted UT-200 with water, which is double quantity of UT-200, and continuous applied it by brush or roller until it fully permeate to capillarity. After 70 percentage curing for first layer, diluted UT-200 with water, which is same quantity of UT-200, then applied it by the method which the above-mentioned. After 70 percentage curing for second layer, applied it without adding water by the method which the above-mentioned to saturation state. After 12 hours of curing, sealing installation is ready to start.
4. For serious condition of walls, installation should be applied several layers for couple days. After observed a period time, next construction is ready to start.
5. Sealing coating: The sealing miture shall be prepared by combining, by weight, 1 part base resin, with 1 part handener, and stirred thoroughly to ensure uniformity using mixer, then by brush or roller to coating to a homogenous seal.
6. Renew: After sealing gent get dried, apply the original paint of wall to recover its original appearance.
Packing 20 pail
Notes Staff does not directly touch the product. Rubber gloves are required to dress. If the product stained with eyes or skin during installation, should be cleaned with water immediately.
 
  HOMEPRODUCTSABOUT US CASENEWSCONTACT US Copyright c YU TAI PAINT CO., LTD. All rights reserved.