|
|
|
|
| Model：UT-507 |
| Name：Sealant used only: Flowability, high hardness, rapid curing |
| Sealant used only: Flowability, high hardness, rapid curing |
|
|
| Description |
YU TAI PU joint filler sealant is a 2-component, rapid full curing and high hardness elastic filler which is composed of Polyurethane resin. |
| Advantage |
1. Superior compressive and resilient properties.
2. Rapid reaction, short term working life, quick drying, it can avoid being damage by bad weather after installation.
3. Good anti-shock, ease to absorb the shock by displacement.
4. High hardness, superior wear resistant.
5. Water resistant, acid resistant, alkail resistant and prevention of ravages of acid rain.
6. Good weathering resistant, UV protection, non cracking and deformed. |
| Instruction for use |
1. All surfaces must be cleaned and dried. Apply DT-004, PU primer, for base base coating while it is necessary.
2. In order to keep air away to cause bubbling appearance, the mixing and pouring process should be continuously.
3.The product should be applied in 5 minutes at 25C temperature, after mixing. |
| Uses |
Caulking function for rail bearing pad, bridge, precast board, parking log and concrete floor. |
| Mixing Ratio |
Main: Hardener=1:1(wt/wt%). |
| Service time |
25C/5min |
| Packing |
36kg/pail |
| Notes |
Must be noticed the service time, mixing amount we needed and used directly after mixing. |
|
| |
 |
|
|
